Warning: Make sure the router bit is properly fastened and tightened in the router’s collet and the bit can rotate freely without any obstructions.
Instructions: Slowly dial up the RPMs on your router to the recommended maximum. Then, dial back if needed to find the “sweet spot”. The sweet spot is the speed at which the least resonant vibration is present. If the sweet spot cannot be achieved within 5,000 RPMs of the max, check the collet for residue or other debris and start over.
Download Router Bit RPM Chart
|
Bit Diameter (Inches)
|
Max RPM
|
Min RPM
|
|---|---|---|
|
1
|
24,000
|
19,000
|
|
1.1
|
24,000
|
19,000
|
|
1.2
|
24,000
|
19,000
|
|
1.3
|
24,000
|
19,000
|
|
1.4
|
24,000
|
19,000
|
|
1.5
|
24,000
|
19,000
|
|
1.6
|
22,500
|
17,500
|
|
1.7
|
21,100
|
16,100
|
|
1.8
|
20,000
|
15,000
|
|
1.9
|
18,900
|
13,900
|
|
2
|
18,000
|
13,000
|
|
2.1
|
17,100
|
12,100
|
|
2.2
|
16,300
|
11,300
|
|
2.3
|
15,600
|
10,600
|
|
2.4
|
15,000
|
10,000
|
|
2.5
|
14,400
|
9,400
|
|
2.6
|
13,800
|
8,800
|
|
2.7
|
13,300
|
8,300
|
|
2.8
|
12,800
|
7,800
|
|
2.9
|
12,400
|
7,400
|
|
3
|
12,000
|
7,000
|
|
3.1
|
11,600
|
6,600
|
|
3.2
|
11,200
|
6,200
|
|
3.3
|
10,900
|
5,900
|
|
3.4
|
10,500
|
5,500
|
|
3.5
|
10,200
|
5,200
|
This Yonico 21035 extremely sturdy, router table is thicker than standard melamine router tables with many extra features. Complete with aluminum router plate, 6" double fence and long support system, sturdy A-stand, and large table top, routing larger stock or vertical stock will be a breeze.
Features:
- Large 31 �" � 24" table top, Ultra-Thick 1-3/8" MDF with top and bottom laminate surface, for a reliable and even surface.
- Aluminum 3/4" miter track installed in table. (For standard 3/4" wide x 3/8" high bar)
- Deluxe 12" � 9" � 3/8" thick Aluminum router plate insert with pre-installed magnets and screws to keep the router securely leveled for precision woodworking.
- Router Plate includes 2 removable rings, providing 3 opening sizes for minimal clearance with any size bit.
- Can be used with virtually any router.
- Starter pin included for easy starting without a fence.
- Double fence support system - One piece angled aluminum fence to secure 90� accuracy plus additional 6" high � 1"" thick MDF split fence with high quality melamine facing.
- The 6" high extra support split fence provides for safer and easier vertical routing.
- Two convenient 18" measuring tapes on both tops of split fence.
- Fence faces are mounted along a t-slot for easy independent adjusting.
- T -track cutouts are installed along the front and rear of the laminate fences for convenient use of jigs and accessories.
- Dust port fits a standard 2-1/2" hose using the included adaptor.
- Easy to assemble sturdy steel stand with self-leveling rubber leg supports.
- The steel stand�s A-frame design provides better stability, eliminating tipping when used with large stock.
Note: Router plate will require drilling for router installation.
Color may vary.